3DFINITY PETG Transparent – clear translucent filament 1.75 mm
Clear translucent PETG filament for 3D printing, 1.75 mm, from a Slovak manufacturer. We check the diameter tolerance of ±0.02 mm during production. 1 kg spool, AMS compatible, vacuum-sealed with desiccant.
Clear translucent PETG filament for 3D printing 1.75 mm – 3DFINITY PETG Transparent
3DFINITY PETG Transparent is a clear translucent PETG filament for 3D printers with a 1.75 mm diameter and ±0.02 mm tolerance on a 1 kg spool. We make it on our own production line in Slovakia and check the diameter during production. Colourless translucent PETG is the best choice for LED diffusers and lampshades where light should pass through without a colour tint. Translucent PETG lets light through, so it suits lampshades, LED diffusers and parts you need to see into. The print is translucent rather than glass-clear – transparency depends on wall thickness and print settings.
- Diameter
- 1.75 mm
- Tolerance
- ±0.02 mm
- Colour
- Clear translucent
- Weight
- 1 kg of filament
- Environment
- indoor, translucent and light parts
Best for
- lampshades and LED diffusers
- light-up decorations
- covers you can see through
Strengths
- lets light through
- good toughness
- moisture resistance
Things to consider
- glass-clear look is not achievable by printing
- higher tendency to string
- every layer is visible
Recommended 3D print settings for PETG Transparent
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 250–270 °C |
| Bed temperature | 70–85 °C |
| Print speed | 25–200 mm/s |
| Enclosure | not required |
| Part cooling | 0–20 % from layer 3 |
| Filament drying | 60 °C, 6–8 h as needed |
| Material density | approx. 1.27 g/cm³ |
| Nozzle | standard, 0.2 / 0.4 / 0.6 / 0.8 mm |
Starting settings for a first test (0.20 mm layer, 0.4 mm nozzle):
Tip: for maximum transparency print thin walls (1–2 perimeters), slower and at the higher end of the temperature range. On smooth PEI or glass use a release layer.
When to choose translucent PETG
| Property | PETG Transparent | PETG solid colour |
|---|---|---|
| Light transmission | yes, translucent | no, opaque |
| Suitable for | light and decorative parts, diffusers | technical and functional parts |
| Layer visibility | more visible | less noticeable |
| Print settings | same as PETG | same as PETG |
For opaque technical parts choose a solid-colour PETG, for example PETG Black.
How the filament arrives and how to store it
Every spool is vacuum-sealed with desiccant in its own box. The spool is AMS compatible. After opening, store the filament sealed with desiccant. If it starts stringing more than usual, dry it in a temperature-controlled dryer at 60 °C for 6–8 hours and do not exceed the spool's temperature rating.
Questions about PETG Transparent
Is PETG Transparent fully clear?
Not fully. The print is translucent and lets light through, but because of the layers it is not glass-clear. Thin walls printed more slowly are the most transparent.
What is translucent PETG good for?
Lampshades, LED diffusers, light-up decorations and covers you need to see into.
Is PETG suitable for outdoor use?
We recommend PETG mainly for indoor use. For parts exposed to sun and weather long-term, choose ASA.
What diameter and tolerance does 3DFINITY PETG have?
We make it in 1.75 mm diameter with a declared tolerance of ±0.02 mm, on our own production line in Slovakia with diameter control during production.
Is the spool AMS compatible?
Yes, 3DFINITY spools are AMS compatible.
Additional parameters
| Category: | PETG |
|---|---|
| Weight: | 1.35 kg |
| EAN: | 8586028240380 |
| Colour: | Transparent |
| Material: | PETG |
Discussion
Be the first who will post an article to this item!
