3DFINITY PETG-CF Black – black filament 1.75 mm, 1 kg
Black PETG-CF filament for 3D printing, 1.75 mm, from a Slovak manufacturer. We check the diameter tolerance of ±0.02 mm during production. 1 kg spool, AMS compatible, vacuum-sealed with desiccant.
Black PETG-CF filament for 3D printing 1.75 mm – 3DFINITY PETG-CF Black
3DFINITY PETG-CF Black is a black PETG-CF filament for 3D printers with a 1.75 mm diameter and ±0.02 mm tolerance on a 1 kg spool. We make it on our own production line in Slovakia and check the diameter during production. Black PETG-CF has a matte technical surface on which layers are less visible. PETG-CF combines the practicality of PETG with carbon fibres. It suits functional brackets, covers and parts where stiffness and a technical matte surface matter.
- Diameter
- 1.75 mm
- Tolerance
- ±0.02 mm
- Colour
- Black
- Weight
- 1 kg of filament
- Environment
- indoor, technical and stiff parts
Best for
- functional brackets and mounts
- technical covers
- dimensionally stable parts
Strengths
- higher stiffness than PETG
- matte surface
- good dimensional stability
Things to consider
- abrasive material – wear-resistant nozzle required
- can be less tough than plain PETG
- needs proper drying and settings
Recommended 3D print settings for PETG-CF Black
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 255–270 °C |
| Bed temperature | 75–90 °C |
| Print speed | 25–200 mm/s |
| Enclosure | not required |
| Part cooling | 0–20 % from layer 3 |
| Filament drying | 65 °C, 6–10 h, recommended before printing |
| Material density | approx. 1.30 g/cm³ |
| Nozzle | wear-resistant, 0.6 / 0.8 mm recommended, 0.4 mm for smaller models |
Starting settings for a first test (0.20 mm layer, 0.6 mm nozzle):
Tip: print dry material. A 0.4 mm nozzle is only suitable for smaller models – the fibres can clog a narrower nozzle. On smooth PEI or glass we recommend a release layer.
PETG-CF or plain PETG?
| Property | PETG-CF | PETG |
|---|---|---|
| Stiffness | higher | lower, more flexible |
| Surface | matte, technical | glossier |
| Nozzle | hardened / wear-resistant | standard brass |
| Drying | recommended before every print | as needed |
If you do not print with a hardened nozzle, choose plain PETG. For parts in long-term sunlight we recommend ASA.
How the filament arrives and how to store it
Every spool is vacuum-sealed with desiccant in its own box. The spool is AMS compatible. After opening, store the filament sealed with desiccant. If print quality gets worse more than usual, dry it in a temperature-controlled dryer at 65 °C for 6–10 hours and do not exceed the spool's temperature rating.
Questions about PETG-CF Black
What is PETG-CF filament good for?
PETG-CF combines the practicality of PETG with carbon fibres. It suits functional brackets, covers and parts where stiffness and a technical surface matter.
Do I need a hardened nozzle for PETG-CF?
Yes. PETG-CF contains abrasive fibres that wear brass nozzles. We recommend a hardened steel or other wear-resistant nozzle of at least 0.4 mm.
Is PETG-CF suitable for outdoor use?
We recommend PETG-CF mainly for indoor use. For parts exposed to sun and weather long-term, choose ASA.
What diameter and tolerance does 3DFINITY PETG-CF have?
We make it in 1.75 mm diameter with a declared tolerance of ±0.02 mm, on our own production line in Slovakia with diameter control during production.
Is the spool AMS compatible?
Yes, 3DFINITY spools are AMS compatible. With abrasive materials, check the wear of feeding parts as recommended by your printer manufacturer.
Discussion
Be the first who will post an article to this item!
