3DFINITY PLA+ Pink – pink filament 1.75 mm, 1 kg
Pink PLA+ filament for 3D printing, 1.75 mm diameter (tolerance ±0.05 mm), 1 kg spool. Pink suits decorations, toys and gifts.
Pink PLA+ filament for 3D printing 1.75 mm – 3DFINITY PLA+ Pink
3DFINITY PLA+ Pink is a pink PLA+ filament for 3D printers with a 1.75 mm diameter (tolerance ±0.05 mm) on a 1 kg spool. Pink suits decorations, toys and gifts. PLA+ is a modified PLA with higher toughness that prints just as easily as regular PLA.
- Diameter
- 1.75 mm
- Tolerance
- ±0.05 mm
- Colour
- Pink
- Weight
- 1 kg of filament
- Environment
- mainly indoor
Best for
- models and decorations
- prototypes
- everyday indoor parts
Strengths
- easy to print
- tougher than PLA
- low tendency to warp
Things to consider
- lower heat resistance
- not for outdoor use
- PETG is better for loaded parts
Recommended 3D print settings for PLA+ Pink
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 200–220 °C |
| Bed temperature | 20–60 °C |
| Enclosure | not required |
| Nozzle | standard |
Values are indicative – fine-tune them for your printer, nozzle and part geometry.
Tip: start in the middle of the temperature range and fine-tune for your printer. Print the first layers without cooling, then with full cooling.
How to store the filament
After opening, store the filament sealed with desiccant so it does not absorb moisture.
Questions about PLA+ Pink
What is the difference between PLA and PLA+?
PLA+ is a modified PLA with higher toughness and prints just as easily.
Is PLA+ suitable for outdoor use?
No, we recommend it for indoor use.
What is the filament diameter?
1.75 mm with a tolerance of ±0.05 mm.
Discussion
Be the first who will post an article to this item!
