3DFINITY PETG Olive Green RAL 6003 filament 1.75 mm, 1 kg
Olive green opaque PETG filament in RAL 6003 for 3D printing, 1.75 mm, from a Slovak manufacturer. We check the diameter tolerance of ±0.02 mm during production. 1 kg spool, AMS compatible, vacuum-sealed with desiccant.
Olive green PETG filament RAL 6003 for 3D printing 1.75 mm – 3DFINITY PETG Olive Green
3DFINITY PETG Olive Green is an olive green, opaque PETG filament in RAL 6003 for 3D printers with a 1.75 mm diameter and ±0.02 mm tolerance on a 1 kg spool. We make it on our own production line in Slovakia and check the diameter during production. Olive green to RAL 6003 is a muted green, popular for models, accessories and military themes. PETG is tougher than PLA, which is why it is used for brackets, covers and functional parts where PLA is no longer enough.
- Diameter
- 1.75 mm
- Tolerance
- ±0.02 mm
- Colour
- Olive green, RAL 6003
- Weight
- 1 kg of filament
- Environment
- indoor, general technical use
Best for
- brackets and mounting parts
- covers and functional parts
- parts exposed to moisture
Strengths
- good toughness
- moisture resistance
- wide practical use
Things to consider
- higher tendency to string
- less crisp detail than PLA
- surface can be glossier
Recommended 3D print settings for PETG Olive Green
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 250–270 °C |
| Bed temperature | 70–85 °C |
| Print speed | 25–200 mm/s |
| Enclosure | not required |
| Part cooling | 0–20 % from layer 3 |
| Filament drying | 60 °C, 6–8 h as needed |
| Material density | approx. 1.27 g/cm³ |
| Nozzle | standard, 0.2 / 0.4 / 0.6 / 0.8 mm |
Starting settings for a first test (0.20 mm layer, 0.4 mm nozzle):
Tip: on smooth PEI or glass use a release layer – PETG bonds to them very strongly. Print the first 2 layers without cooling; overhangs and bridges may need more.
When to choose PETG instead of PLA
| Property | PETG | PLA |
|---|---|---|
| Toughness | higher, the part bends rather than cracks | stiffer but more brittle |
| Moisture resistance | good | lower |
| Detail and surface | less crisp detail, glossier surface | crisper detail |
| Ease of printing | medium, prone to stringing | easiest |
For parts exposed to sun and weather long-term we recommend ASA. For higher stiffness there is PETG-CF with carbon fibres.
How the filament arrives and how to store it
Every spool is vacuum-sealed with desiccant in its own box. The spool is AMS compatible. After opening, store the filament sealed with desiccant. If it starts stringing more than usual, dry it in a temperature-controlled dryer at 60 °C for 6–8 hours and do not exceed the spool's temperature rating.
Questions about PETG Olive Green
What is PETG filament good for in 3D printing?
PETG combines fairly easy printing with higher toughness and durability. It suits brackets, covers and parts for everyday technical use.
Is PETG suitable for outdoor use?
We recommend PETG mainly for indoor use. For parts exposed to sun and weather long-term, choose ASA.
What diameter and tolerance does 3DFINITY PETG have?
We make it in 1.75 mm diameter with a declared tolerance of ±0.02 mm, on our own production line in Slovakia with diameter control during production.
Do I need a hardened nozzle for PETG?
No, plain PETG prints with a standard 0.2 to 0.8 mm nozzle. Fibre-filled materials such as PETG-CF need a hardened nozzle.
Is the spool AMS compatible?
Yes, 3DFINITY spools are AMS compatible.
Which 3D printers is the filament for?
For FDM 3D printers using 1.75 mm filament. No enclosure is needed, a heated bed at 70–85 °C is enough.
Discussion
Be the first who will post an article to this item!
