Magigoo Pro Flex
MAGIGOO Flex is a specialised adhesive for 3D printing flexible filaments such as TPU, TPE and TPC. It solves adhesion and warping problems that can occur with flexible materials. It acts as an interlayer, ensuring good adhesion while making it easier to remove prints after cooling. Ideal for professional use, developed and tested with various brands of flexible filament.
MAGIGOO Flex was developed for professional use and may only be used with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer) and TPC (thermoplastic copolyester) filaments.
Some flexible filaments adhere poorly to conventional 3D printing surfaces and tend to warp. Others stick too strongly to glossy surfaces such as glass and PEI. MAGIGOO Flex is a specialised solution for printing flexible FDM filaments, developed for different types of flexible filament. It acts as an interlayer between the build plate and the printed part, giving good adhesion and making removal easier when needed.
How to use Magigoo Pro Flex:
MAGIGOO Flex was developed and tested for use with various brands of flexible filament.
- Shake the bottle.
- Apply to the required area by pressing the tip onto the print bed (this opens the internal valve).
- Print according to the filament or printer manufacturer's recommendations.
- Let it cool down and remove the print.
- Cleaning – wipe with a damp cloth.
Additional information:
Using this product with filaments other than flexible ones may cause excessive adhesion and damage your build surface.
For larger prints and high-shrinkage filaments a 20 mm brim is recommended. If adhesion is excessive, wet the print bed with a small amount of water and work it slowly under the print – this should make removal easier.
Discussion
Be the first who will post an article to this item!
