Magigoo Pro PC
MAGIGOO PC is a specialised adhesive designed exclusively for 3D printing with polycarbonate filament. Prints stick firmly while the bed is hot and release effortlessly after cooling, with no tools needed. Ideal for functional prototypes and end-use parts, compatible with glass and other surfaces. Efficient and easy to use and clean.
MAGIGOO PC is intended only for use with polycarbonate filament. This professional adhesive makes sure prints stick firmly while the print bed is hot and can be removed easily after cooling. This unique mechanism means no tools are needed to remove prints from the plate.
Thanks to its strength and hardness, PC is an ideal FDM material for functional prototypes and end-use parts, although it is challenging to print. Magigoo PC can be used on glass and several other surfaces.
How to use Magigoo Pro PC:
MAGIGOO PC was developed and tested with various brands of PC filament. Because every plastic formulation is slightly different, the ideal settings for MAGIGOO PC may vary.
- Shake the bottle.
- Apply to the required area by pressing the tip onto the print bed (this opens the internal valve) and spread as needed.
- Print according to the filament or printer manufacturer's recommendations.
- Let it cool down and remove the print.
- Cleaning – wipe with a damp cloth.
Additional information:
For larger prints a 20 mm brim with several layers is recommended.
If adhesion is excessive, wet the bed with a small amount of water.
Discussion
Be the first who will post an article to this item!
