3DFINITY PLA Gold – gold filament 1.75 mm, 1 kg
Gold PLA filament for 3D printing, 1.75 mm diameter (tolerance ±0.05 mm), 1 kg spool. Gold gives decorations and figurines a festive look.
Gold PLA filament for 3D printing 1.75 mm – 3DFINITY PLA Gold
3DFINITY PLA Gold is a gold PLA filament for 3D printers with a 1.75 mm diameter (tolerance ±0.05 mm) on a 1 kg spool. Gold gives decorations and figurines a festive look. PLA is the easiest material for 3D printing, suitable for prototypes, models and decorations.
- Diameter
- 1.75 mm
- Tolerance
- ±0.05 mm
- Colour
- Gold
- Weight
- 1 kg of filament
- Environment
- mainly indoor
Best for
- decorations and models
- prototypes
- hobby projects
Strengths
- easy to print
- low tendency to warp
- nice surface
Things to consider
- lower heat resistance
- not for outdoor use
- limited to lightly loaded parts
Recommended 3D print settings for PLA Gold
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 190–220 °C |
| Bed temperature | 20–60 °C |
| Enclosure | not required |
| Nozzle | standard |
Values are indicative – fine-tune them for your printer, nozzle and part geometry.
Tip: start in the middle of the temperature range and fine-tune for your printer. Print the first layers without cooling, then with full cooling.
How to store the filament
After opening, store the filament sealed with desiccant so it does not absorb moisture.
Questions about PLA Gold
Is PLA suitable for outdoor use?
No, we recommend PLA for indoor use.
What is the filament diameter?
1.75 mm with a tolerance of ±0.05 mm.
Discussion
Be the first who will post an article to this item!
