3DFINITY PLA Lumi Green RAL 6038 filament 1.75 mm, 1 kg
Bright green PLA filament in RAL 6038 for 3D printing, 1.75 mm, from a Slovak manufacturer. We check the diameter tolerance of ±0.02 mm during production. 1 kg spool, AMS compatible, vacuum-sealed with desiccant.
Bright green PLA filament RAL 6038 for 3D printing 1.75 mm – 3DFINITY PLA Lumi Green
3DFINITY PLA Lumi Green is a bright green PLA filament in RAL 6038 for 3D printers with a 1.75 mm diameter and ±0.02 mm tolerance on a 1 kg spool. We make it on our own production line in Slovakia and check the diameter during production. Bright green to RAL 6038 is a very vivid, eye-catching shade – for toys, school projects and markings. It does not glow in the dark. PLA is the easiest material for 3D printing: it suits prototypes, models, decorations and everyday parts where easy printing and a nice surface matter.
- Diameter
- 1.75 mm
- Tolerance
- ±0.02 mm
- Colour
- Bright green, RAL 6038
- Weight
- 1 kg of filament
- Environment
- mainly indoor
Best for
- prototypes and test models
- decorations and visual parts
- school and hobby projects
Strengths
- easy to print
- low tendency to warp
- clean surface and good detail
Things to consider
- lower heat resistance
- not for long-term outdoor stress
- consider the load for functional parts
Recommended 3D print settings for PLA Lumi Green
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 210–225 °C |
| Bed temperature | 50–60 °C |
| Print speed | 25–200 mm/s |
| Enclosure | not required |
| Part cooling | 80–100 % from layer 3 |
| Filament drying | 45 °C, 6 h as needed |
| Material density | approx. 1.24 g/cm³ |
| Nozzle | standard, 0.2 / 0.4 / 0.6 / 0.8 mm |
Starting settings for a first test (0.20 mm layer, 0.4 mm nozzle):
Tip: when printing in an enclosed printer, open the door or lift the lid. Heat in the enclosure can soften the filament before it reaches the nozzle and cause a clog.
When to choose PLA and when PETG
| Property | PLA | PETG |
|---|---|---|
| Ease of printing | easiest | medium |
| Detail and surface | crisper detail | glossier, less crisp |
| Heat resistance | lower | higher |
| Toughness | stiffer but more brittle | the part bends rather than cracks |
For functional parts that need to withstand more, choose PETG. For parts in long-term sunlight we recommend ASA.
How the filament arrives and how to store it
Every spool is vacuum-sealed with desiccant in its own box. The spool is AMS compatible. After opening, store the filament sealed with desiccant. If print quality gets worse more than usual, dry it in a temperature-controlled dryer at 45 °C for 6 hours and do not exceed the spool's temperature rating.
Questions about PLA Lumi Green
What is PLA filament good for?
PLA suits prototypes, models, decorations and everyday parts where easy printing and a nice surface matter.
Is PLA suitable for outdoor use?
We recommend PLA mainly for indoor use. For parts exposed to sun and weather long-term, choose ASA.
What diameter and tolerance does 3DFINITY PLA filament have?
We make our PLA filament in 1.75 mm diameter with a declared tolerance of ±0.02 mm, on our own production line in Slovakia with diameter control during production.
Is PLA suitable for beginners?
Yes. PLA has a low tendency to warp, needs no enclosure and a bed at 50–60 °C is enough.
Is the spool AMS compatible?
Yes, 3DFINITY spools are AMS compatible.
Discussion
Be the first who will post an article to this item!
