3DFINITY PLA-CF Black – black filament 1.75 mm, 1 kg
Black PLA-CF filament for 3D printing, 1.75 mm, from a Slovak manufacturer. Carbon fibres, higher stiffness and a matte surface, print with a hardened nozzle. 1 kg spool, vacuum-sealed with desiccant.
Black PLA-CF filament for 3D printing 1.75 mm – 3DFINITY PLA-CF Black
3DFINITY PLA-CF Black is a black PLA-CF filament for 3D printers with a 1.75 mm diameter on a 1 kg spool. We make it in Slovakia. Black PLA-CF has a matte surface on which layers are less visible, so prints look technical and clean. Carbon fibres give PLA higher stiffness and a matte technical surface, while keeping the easy printing of PLA.
- Diameter
- 1.75 mm
- Colour
- Black
- Weight
- 1 kg of filament
- Environment
- indoor, stiff and visual parts
Best for
- stiff covers and frames
- jigs and models with a technical look
- parts with a matte surface
Strengths
- higher stiffness than PLA
- matte surface, less visible layers
- as easy to print as PLA
Things to consider
- abrasive material – wear-resistant nozzle required
- lower heat resistance, as with PLA
- more brittle on impact
Recommended 3D print settings for PLA-CF Black
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 195–220 °C |
| Bed temperature | 0–50 °C |
| Enclosure | not required |
| Nozzle | hardened / wear-resistant, 0.6 mm or larger recommended |
Values are indicative – fine-tune them for your printer, nozzle and part geometry.
Tip: print dry material with a hardened nozzle. Carbon fibres wear out a brass nozzle quickly.
PLA-CF or plain PLA?
| Property | PLA-CF | PLA |
|---|---|---|
| Stiffness | higher | lower |
| Surface | matte, technical | smooth, glossier |
| Nozzle | hardened / wear-resistant | standard |
For higher durability and stiffness choose PETG-CF.
How the filament arrives and how to store it
Every spool is vacuum-sealed with desiccant in its own box. The spool is AMS compatible. After opening, store the filament sealed with desiccant. If print quality gets worse more than usual, dry it in a temperature-controlled dryer at 45 °C for 6 hours and do not exceed the spool's temperature rating.
Questions about PLA-CF Black
Do I need a hardened nozzle for PLA-CF?
Yes. Carbon fibres are abrasive and wear out a brass nozzle. We recommend a hardened or other wear-resistant nozzle, ideally 0.6 mm.
What is the difference between PLA-CF and PETG-CF?
PLA-CF is easier to print and at a lower temperature. PETG-CF is more durable and copes better with heat and moisture.
Is PLA-CF suitable for outdoor use?
No, we recommend PLA-CF for indoor use. For parts in long-term sunlight choose ASA.
Discussion
Be the first who will post an article to this item!
